By documenting standard practices, the CISC Code of Standard Practice aims to provide guidance on current practices in the Canadian structural steel fabrication and erection industry and its clients.

Part Two of the Steel Design Series (SDS-2) aims to aid engineers in determining the resistance of bolt groups subjected to an eccentric and inclined point load. The Handbook of Steel Construction, 11th Edition, contains tables of Eccentric …

The AISC Steel Solutions Center is proud to release our Structural Steel Dimensioning Tool. Your interactive one-stop-shop, either at your desk or on-the-go, for detailing dimensions for all rolled sections in the 2017 printing of the 15th Edition AISC Steel Construction Manual.

workable Gage The AISC Steel Construction Manual Table 1-1 lists the workable gage for a W14×145 as 3-7½-3. These large W14 sections are the only members in this table that have the gage listed as such. Can you please explain this gage designation? Those particular W14 sections with a large flange width can

CISC Handbook of Steel Construction - Useful Tables Note: not all useful tables are mentioned here; these are some of the most directly applicable. Note Note Note: be very, extremely, completely careful in the use of tables.

The following webpage tool gives you access to AISC's structural steel shapes in the U.S. This tool is useful in the design process as a reference to determine the general availability, engineering design data of specific structural steel shapes.

By documenting standard practices, the CISC Code of Standard Practice aims to provide guidance on current practices in the Canadian structural steel fabrication and erection industry and its clients. The latest edition of the Code can be found on the CISC website (www.cisc-icca.ca). 1. General Provisions .

Gage in.2 in. in. in. in. in. in. in. W 10 x 12 x 15 x 17 x 19 W 10 x 22 x 26 x 30 W 10 x 33 x 39 x 45 W 10 x 49 x 54 x 60 x 68 x 77 x 88 x100 x112 W 12 x 14 x 16 x 19 x 22 W 12 x 26 x 30 x 35 W 12 x 40 x 45 x 50 W 12 x 53 x 58 3.54 4.41 4.99 5.62 6.49 7.61 8.84 9.71 11.5 13.3 14.4 15.8 17.6 20.0 22.6 25.9 29.4 32.9 4.16 4.71 5.57 6.48 7.65 8. ...

Mar 23, 2018 · For any angle leg, if you can fit them, you can use staggered bolts as long as you can provide the recommended minimum bolt hole edge distance (AISC Table J3.4) and conversely provide clearance off the orthogonal leg for nut/washer clearance and wrench access (AISC 14th Ed Tables 7-15 and 7-16). Depends on your bolt size and angle thickness.

Although actual gages are determined by a number of different parameters including loads, member sizes and connection geometry, the workable gages in Table 1–1 still should be used as a guide. For example, consider a W14x132 bottom chord splice requiring two 1-in.-diameter, A490–Slip Critical–OVS bolts across each flange,