The 2025 ATV Sand Wars event will be held at Little Sahara, OK October 9-11. Get your campsite reserved now! ATV Sand

Aug 12, 2008 · Q#2:What happens when my Banshee isn't jetted properly? A#2:If the jetting is slightly lean or rich, the most you'll suffer is a loss of performance. However, if the jetting is way too lean or rich, your Banshee will overheat rapidly resulting in melted or seized pistons (which is the ultimate "bummer" for the 2-stroke motor).

Jan 13, 2019 · Adding a +3,+1 front end on a banshee will make it 6” wider and switching from stock offset to 4/1 will bring the total width down around 2” to a total of 4” wider than stock. That loss of 2” may not sound nice but you’ve reduced bump steer from the wider arms, still increased overall width, and corrected the scrub radius so your ...

Sep 7, 2015 · I upgraded the carbs to 28PWK's on my last banshee and it was stock with basic mods (pipes, air filter, ect.). It very well may have been a waste of money but it did improve my throttle response. From all of the replies, I would say the upgrade depends on if you feel like spending some cash or not. I thought about doing it again to my new one.

Dec 31, 2024 · Have an 89 banshee. Starts first kick every time hot or cold, has insane top end power too. Pretty much stock except for fmf fattys, toomey silencers, and uni pods.

Dec 23, 2004 · The most common and best all around tire height is the stock 20 inch size. The middle number which is the width of the tire is pretty much useless info, they're usually either 10 or 11 inches wide and either width will fit on your stock or aftermarket rims. The last number representing rim size is 9 inches on a stock Banshee and 99% of sport quads.

Mar 6, 2004 · for every 1 gallon of gas, put 4 ounces of yamalube (recommended) 1 gallon=128 ounces(oz) 20:1 will be 128/20=6.4 ounces of yamalube per 1 gallon of gas 32:1 will be 128/32=4 ounces of yamalube per 1 gallon of gas 40:1 will be 128/40=3.2 ounces of yamalube per 1 gallon of gas how many ounes per g...

May 9, 2024 · This forum is dedicated to the BansheeHQ Gear. There are inventory lists for stickers, hoodies, t-shirts, hats and beanies.

May 27, 2004 · could someone explain how to test the stator while still in the shee? I have no spark, so I want to decide if the stator is putting out anything to the cdi box. I know the pickup ciol is ok. I dont know about the coil, but I wanted to start at the begining.. Help would be appreciated.

Mar 26, 2012 · Greetings all... I just installed below parts and want to know what jets I should go with - Pro design coolhead (domes 20cc). - T5 exhaust and pipes. - K&N pods with outerwear. - Pistons 64.50mm (0.20"over) - V-force 3 (used). I noticed that exhaust pressure is not equal so I thought to check...