Dec 31, 2009 · As of yesterday, I left my house, Jeep was running normal, stopped at Advanced to have them recharge another vehicles battery. Once I left advanced and got down the road a …

Dec 27, 2021 · I've had a bad PDM before, that wound up just being a Tantalum Capacitor and a Diode in there that shorted. After they were replaced everything was back to normal with it. 96 …

Dec 21, 2008 · I recently had issues with my Jeep and there were many suggestions along the way as to what it may be. With all of the help I narrowed it down to a bad TPS or bad MAP. In …

Mar 8, 2011 · jack up the jeep from the axle until the tire is a couple inches off the ground. put a prybar under the tire. Then put a pipe under the prybar sideways. Push down (pry up) onthe …

May 8, 2010 · All i can think is that the Pump has nothing left to push fluid up into the core, but being that i already ripped the jeep apart twice, once for the Rad and again for the Head , i …

Jan 4, 2025 · Because with the Jeep on the jack stands (only rear in the air) and up to 80 mph when you crawl under it the noise is coming from the transfer case bell housing area it's not …

Jul 1, 2011 · Do the same for the grounding wires from the starter to engine block, and from the battery and engine to the Jeep's frame/body. You must remove, scrape, and clean until shiny, …

Aug 2, 2007 · Most 4" of spring under lift require a 4 degree correction. If you lifted your jeep 2.5" you "may" not need to do a thing. The shims are placed under your spring perches, above …

Nov 28, 2008 · But im noticing my jeep hesitates/bucks feels like its about to stall kinda problem or mis fires. But when im crusing at about 40-50 i notice a hesitation and stutter/misfire feeling …

May 19, 2012 · I went to the local NAPA and got a replacement, result: the Jeep started up life was good. After a few months I started experiencing the dropped RPM issue described in this …