Mar 18, 2015 · I still had the vibration with the 2 degree shim, and ordered a 3 degree shim. Not much difference in ride so I rechecked and rechecked everything. Finally bought another 2 …

Feb 14, 2008 · Install the shim with the center pin in the indentation on the shim. Lower the axle back down on the spring pack. Be sure the nub on the shim lines up with the hole in the perch …

Sep 2, 2015 · I had a 2 degree axle shim from my previous rear suspension setup that I used with the current Alcan setup to reduce/prevent bad vibes in the rear (which has worked). …

May 20, 2020 · I have a few Questions about SHIM installation process. I know they go between the leaf spring pack and the perche on the axle and the thick part of the shim face toward the …

Jun 14, 2019 · Absolutely no chance of the head inserting. I used a stepper bit to drill them. After they were redrilled, the head fit fine without any "slop" but not clamping or pressed in so to …

Aug 31, 2009 · Spent 3 hours installing the shims finally yesterday, when I was bolting everything backed together I noticed that the shim is larger than the flat plate on the axle. The hole is also …

Jun 13, 2021 · Some other kinds of shims you bolt right into, like the ADO one or WFO concepts steel ones, but the shim you pictured seems like you will need a spacer. Before you undo the …

Nov 25, 2011 · So I finally got around to installing my rear OME springs and shocks. I also bought 2.5 deg axle shims but when I put them on the rear spring they are even with the spring …

Nov 26, 2014 · I have a lot of virbation with the OME kit..I searched and found an thread that states the shims should be facing THICK side front - towards front bumper..

Oct 30, 2021 · The shim should go with the thin side to the rear of the truck in between the leaf spring and the axle. Forgive my artwork, I'm not all that talented. If you don't mind, let me know …