
Respirator Filters – how to select the correct filter type | Draeger
Filters are classified according to their capacity (gas filter) or their efficiency (particle filters). The particle filter class indicates how efficiently particles are filtered from the ambient air. Our filter class chart gives you a quick overview.
ABEK gas filters: what you need to know - vdp.com
Jul 12, 2023 · First, you need to find out which gases and vapours are or could be released in your company's workplace. Then look up which filter (s) to buy using the colour code. The maximum amount of certain gases or vapours that could be released into the air varies from one situation to another.
Respirator Filter & Cartridge Selection Guides
This page provides information charts for North & 3M respirator cartridges and filters. These reference guides will help you chose what type of respirator cartridge or filter you need per situation.
The following table shows various application fields and the suitable mask-filter-combination recommended. Here you can find a detailed list of examples of applications. HM = half mask, VM = full face mask
Respirator Selection | Respiratory Protection Safety Expertise …
Filter type ABE = are suitable for both certain organic vapours/acid gases and sulfur dioxide e.g. solvents, chlorine and sulfur dioxide (cartridge label colour = brown, grey and yellow) Filter type K = ammonia gas (cartridge label colour = green)
• Optimal Filter usage target is assisted by AirSensit™ Technology • Fitted with a near-field communication chip - Collects and transfers filter usage data to the CleanSpace Smart App via the power unit
Whether or not a mask/filter/respirator is suitable can be determined by using the following calculation: Required protection factor (RPF) = Measured level of contamination For example: RPF = 250mg/m³ There-
The most frequently used filters are of the ABEK type, which protect against many hazards at the same time, due to the wide range of protection that they provide.
Description The CleanSpace Combined Filter TM3 ABEK1 P SL R is suitable for protection against airborne particulate (dust, mists and fumes), organic, inorganic gases or vapours, solvents, ammonia and sulphur dioxide (boiling point >65C). IMPORTANT: When selecting a CleanSpace Filter please consult a Health and Safety specialist for advice
Choosing a Filter In general, most products have a Material Safety Data Sheet (MSDS) with them . Section 8.2 of the MSDS in the Resp section 'should' inform of which filter to use with that product Below is a list with a number reference to links of products suitable to each filter on the JSP Limited website Filter With Beard Clean Shaven
- Some results have been removed