Nov 29, 2022 · ASTM D695–15 刚性塑料压缩性能标准试验方法 刚性塑料压缩性能标准试验方法1 Standard Test Method for Compressive Properties of Rigid Plastics 1 中文版 ASTM 美国材料试验协会 阅读了该文档的用户还阅读了这些文档. 28 p. ...

This standard is issued under the fixed designation D695; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision.

Dec 6, 2023 · 有关astm 标准年鉴卷信息，请参阅 astm ⽹站上的标准⽂档摘要页⾯。 本标准以固定编号 D695 发布；紧随名称后的数字表⽰最初通过的年份，或者在修订的情况下，表⽰最后修订的年份。

Designation: D695 − 23 Standard Test Method for Compressive Properties of Rigid Plastics1 This standard is issued under the fixed designation D695; the number immediately following the designation indicates the year of original adoption or, in …

Aug 9, 2023 · 1.1 This test method covers the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in compression at relatively low uniform rates of straining or loading. Test specimens of standard shape are employed.

astm d695-23 刚性塑料压缩性能的标准测试方法 本标准规定了在相对较低的均匀应变或加载速率下，测定未增强和增强刚性塑料（包括高模量复合材料）在

astm d695标准描述了根据端面载荷压缩原理（正面施加载荷）来测定硬质塑料机械性能（如杨氏模量和强度）的压缩试验，其中力仅通过试样的端面施加。astm d695标准可用于刚度高达41 gpa的复合材料，包括玻璃纤维增强织物复合材料。

ASTM D695-23硬质塑料压缩性能的标准试验方法1.1 本试验方法涵盖了在相对较低的均匀应变率或载荷下压缩加载时，非增强和增强硬质塑料（包括高模量复合材料）的机械性能的测定。采用标准形状的试样。本程序适用于41370 MPa（6000000 psi）及以下的复合模量。

Apr 9, 2025 · ASTM D695-23的标准全文信息,1.1 本测试方法涵盖了未增强和增强硬质塑料（包括高模量复合材料）在以相对较低的均匀应变或加载速率进行压缩加载时的机械性能的测定。 采用标准形状的测试样本。 此程序适用于高达 41,370 MPa (6,000,000 psi) 的复合材料模量。

Aug 1, 2023 · 1.1 This test method covers the determination of the mechanical properties of unreinforced and reinforced rigid plastics, including high-modulus composites, when loaded in compression at relatively low uniform rates of straining or loading. Test specimens of standard shape are employed.