The ICON A5 650 Edition (or “A5”) is a two-seat, single-engine, amphibious Light Sport Aircraft. The A5 has a conventional high wing, tail-aft configuration with ailerons, flaps, elevator, rudder …
actuators/bell cranks (ASN 00001-00011, 00013-00020). These differences are identified below; unless otherwise indicated, steps apply to all configurations. CONSUMABLES AND BULK …
AIRCRAFT AFFECTED: MAKE & MODEL: ICON A5 SERIAL NUMBERS: ASN: 00130 – 00153; 00155; 00156; 00158 – 00166 REQUIRED ACTION: Inspect the canopy latch mechanism for …
ICON has determined that the cause of these incidents is the degradation (or failure) of the NLG actuator stop switch, which can be a result of inadvertent switch damage, poor performance of …
ICON has identified that some of the 4 AWG wire harness to terminal connections in the affected aircraft do not meet the required tensile pull force of 140lbs due to improper crimping of the …
ICON Aircraft Updates
May 14, 2014 · Last night at EAA AirVenture in Oshkosh, Wisconsin, ICON Aircraft unveiled the first production A5, an aircraft the company refers to as Engineering Serial Number 1 (ESN-1). …
ICON has determined that the cause of these incidents is the degradation (or failure) of the NLG actuator stop switch, which can be a result of inadvertent switch damage, poor performance of …
Transponder and ELT Antenna Replacement - ICON Aircraft
For G3X aircraft, perform a transponder functional test for transmission on 121.5 MHz and 406 MHz. If the control unit was replaced, configure the transponder. See 190-01499-10 Ga
Contact ICON Aircraft if any anomalies are found. NOTE: ASN 00001 – 00138 originally did not have insulating washers installed. They must be installed by preparing the ACK ELT Whip …
ICON Aircraft was made aware of a loose rudder pedal assembly on the pilot side of the ICON A5 resulting in excessive side-to-side movement of both the left and right rudder pedals. After …