Jun 27, 2024 · I've been trying to figure out how to get my stock 1965 GTO to go 13.99 for quite some time. Tuning the best I can and following the 1965 NHRA Rules, I finally got this GTO to go 13.78 @ 101.55. It's exciting and I'm thrilled to share it here. The 2 biggest helps were shifting quickly (not power...

Nov 22, 2011 · I just used the tools on Wallaceracing.com to find that 99 heads are from a 1971 250hp 400, and will have smaller valves and probably pressed in rocker studs. YU for model year 1970 was a 350, should have block casting number 9799916 on the top passenger side next to the transmission, below the head.

Mar 2, 2017 · I've been trying to figure out how to get my stock 1965 GTO to go 13.99 for quite some time. Tuning the best I can and following the 1965 NHRA Rules, I finally got this GTO to go 13.78 @ 101.55. It's exciting and I'm thrilled to share it here. The 2 biggest helps were shifting quickly (not power...

Jun 14, 2006 · The GTO concept would have required a lot more work, and probably taken longer than from 99-04 to get off the ground with approvals, plant alterations etc. Also I don't recall any platform/sister vehicles mentioned with the 99 concept, and usually car manufacturers like to share components/platforms when possible as it is more economical.

Aug 7, 2011 · Thinking about a 74 GTO shaker, in black. And that would be the correct rearward facing opening, unlike my wife's Challenger 😆.

Jun 1, 2010 · Ignition Lock Cylinder Replacement (Click on Pictures to inlarge) Removal Procedure 1: Disable the SIR system.(Turn the steering wheel stright so the wheels are stright ahead, turn the ignition switch off, remove the SIR Fuse wait 1min before working on the system) 2: Remove the key from the...

Mar 18, 2023 · Well then, OPGI has 65-67 GTO hoods for $417.99 and eBay has Dynacorn for $799.99. Actually I'd trust Ames more and they have 65-67 GTO hoods for $479 and 65-67 Lemans/Tempest hoods for $459. Hoods are all over the place...

Aug 29, 2019 · I have a 64 Tempest w a stock 326ci Rochester 2GC Engine has always run well but was in need of a tune up. Replaced spark plugs, wires, distributor, fuel filter, vacuum/fuel hoses, etc. Had the carb professionally rebuilt. Engine has been running better but has had a small hesitation on...

Nov 14, 2023 · Here’s an opportunity to save on bucket seat frames for your GTO 99.999% sure that these are Dynacorn as are the OPGI sold models. I will let everyone know...

Aug 17, 2011 · After 6 days of work, many hours of sweat, and ordering new ball joints on Sunday night my GTO is back together with an all poly bushing front end! Things I learned while doing this, TAKE OFF THE ROTORS. You don't have to, in theory but it makes life easier. Some PB Blaster, and a few hits of...