9140-The 9140 (H10) bulb is a small, single-filament bulb uses primarily for fog or auxiliary lighting purposes. Emits 40W of power at 900 lumens, exceptional use for low-power, low-heat spaces. 90-degree PY20d base 9006-The 9006 (HB4) bulb is a single-filament bulb used in split-beam headlight designs as a low beam bulb. It puts out 55W @ 12 ...

Questions and answers related to halogen bulbs

The arc chamber ended up almost exactly were the filament of the H7 bulb was. It actually worked ok, much better than a pnp kit and was nice to use a OEM bulb rather than a hot running bulb from China. Cutoff and color were better than the H7 bulb too but I also installed a clear lens at the same time which had more to do with the cutoff.

Aug 19, 2016 · All bulb sizes have a legal range of plus or minus 10 to 15%. Tinted, eco, long life, etc bulbs will be at the bottom of this range. Maximum performance bulbs will be at the top. That means that comparing a bottle of the shelf blue coated bulb to a high performance bulb such as one listed below could net you up to 30% more light.

Same deal here. Run-of-the-mill 9011 bulb versus highly optimized 9011 bulb. Some people said that the Philips 9011 is basically a "boosted" 9005 bulb, and it does look like it here. The 9011 bulb has visible gaps between the turns. The Toshiba bulb's filament is a little wavy. But it appears to be as similarly dense as the new Sylvania 9011's ...

The H13 is quite possibly the stupidest design for a bulb ever foisted on the public. Low performance at a high price. The terminals are so small that they overheat, even at stock wattages, and melt the plastic housing of the connectors. We Recommend replacing the connector with the ceramic unit listed below.

Mar 8, 2023 · H11 bulb shootout: GE Megalight +130, Osram Nightbreaker Laser VS. Standard H11 and H9 by evo77.

you can use a 3157 no problem, but like markus said its not really recommended. you are replacing a 500 lumen 3457 filament bulb with a 50 lumen led bulb (at best). there is no way it would be bright enough, especially not in a reflector designed around a filament bulb. the only led bulb i would really recommend is the elef-usa.com leds which use hi power luxeon and osram 3w and 5w leds with a ...

New to the forums, an i and i had a few questions. Just installed my new d2s projectors and relay harness, now i didn't realize that i had to use d2s bulbs as well.

Feb 28, 2020 · Every bulb was inserted into the projector and then the entire projector was reaimed until glare levels were under control. Under control means falling under federal rules, or below ~16 lux at 26.5 feet at 0.5U, 1.5L. It is important to note that both LED bulbs required fairly extensive reaiming to get to the desired glare levels.