What exactly is a 6mm fillet weld? The 6mm fillet weld is the default value for the size of the fillet if the designer doesn’t specify any. It’s crucial to note that this value is different from the …

A typical specification for a CFW is 6CFW or 8CFW. The number is the leg length of the weld and will be specified by the structural engineer based on the loads on the weld and the strength of …

The two types of construction fillet weld (Cfw) are 6cfw and 8cfw. The number indicated is the weld’s leg length. The engineers at Structural Consultancy will specify the length given the …

Sep 1, 2019 · If you have a read of this tutorial here: PSP 6.61 Custom Firmware Install on any PSP it will explain how to update your PSP and install the 6.61 CFW. I'm currently running the …

This shows a 6” fillet weld to be applied to the arrow side. There may be times where a length is given on a part and the location of the weld will be given with a dimension in order to achieve …

For example, 6 CFW (continuous fillet weld) achieves around 1 kN/mm, so for 100 kN, you need a 100 mm weld length. Most optimal sizes are up to 6 mm because they can be done with a …

This guide assumes you have updated your PSP to version 6.60 or 6.61 official firmware. 6.60 will offer slightly more compatibility for homebrew and plugins compared to 6.61. The PS Store is …

PRO CFW supports the following 4 different PSP Kernel: 6.20, 6.35, 6.39, 6.60. If your PSP runs a firmware, lower or equal to 6.60, your PSP should be compatible to PRO CFW. Should your …

This guide will cover installing ARK-4 on the PSP and general usage to cover the basics of this newer custom firmware(CFW). It is a successor to PRO and ME with additional features and …

Fillet welds for economy should be sized to be single pass welds if possible—this generally means 6 mm or 8 mm fillet welds, although some welding procedures will allow 10 mm single …