Ekstensive, Ekstensive Metal Works, Texas Metal, Air ride, air bags, air suspension,

Link bars are constructed of 2x2 square tubing with a 1/4 wall thickness. The Axle saddles are built to your axles specs and CNC cut and broke out of 1.4 inch mild steel. We also send a track bar with this kit and the hardware needed to attach the track bar between the two link bars.

Pay over time with Affirm. See if you qualify at checkout. Ekstensive 2 link bar with energy suspension bushing.

Ekstensive 2 link bar with energy suspension bushing. This bar has no mounts a bolt for centering it on the rear end and a 2in block welded on top The total lenght is 30in center from bolt hole to bolt hole is 26 1/2 Perfect bar for the following applications …

May 1, 2012 · My kit from Ekstensive came with a panhard bar that locates one end on the inside of the step notch and the other end welds onto the axle housing. The panhard bar is supposed to be installed in a level position at ride height right?

Typically used in a "Bag-On-Bar" Setup, 2-Link Kits are a simple way to control the front to back motion and the rotation of the pinion as the rear differential articulates through it's range of motion.

Offroad Design Budget Spring 6" Lift Kit for 1973-1991 GM/Chevy Trucks

Autofab’s 2-Link kits keep the axle wrap down to a minimum when using our soft ride wheel travel springs. They also keep the rear end centered side to side under hard off-road abuse.

2-Link Kit for Ford F150 Raptor and other sub-models from 2009-2014. Autofabs’ 2-Link kits are not just traction bars. They have been designed to eliminate wheel hop, keep the pinion angle correct, and keep the rear end located from side to side while not restricting wheel travel.

Browse Wehrs Machine 2 link race car suspension brackets today at Day Motor Sports. Both adjustable shock mount and IMCA legal non-adjustable shock mount versions available.