JIC Fittings Dimension chart is very useful for a customer to select the right fittings and install correctly in application. This blog will introduce in details about the JIC fittings and its thread chart.

15/16 - 12 THREAD CHARTS • JIC – SAE • Metric/International VISIT US AT BRENNANINC.COM. Created Date: 2/12/2010 2:12:48 PM ...

JIC fittings, defined by the SAE J514 and MIL-DTL-18866 standards, are a type of flare fitting machined with a 37-degree flare seating surface. JIC (Joint Industry Council) fittings are widely used in fuel delivery and fluid power applications

Also known as JIC (Joint Industrial Council) fittings, these provide a tight metal-to-metal seal on stainless steel tubing that is flared to 37°. The male pipe threads on these fittings have a sealant applied for extra protection against leaks.

JIC/AN Fitting is a range of hydraulic fittings which is made in accordance with SAE J514 and ISO 8434-2 standards. Check out the JIC fittings Chart in details.

Apr 2, 2020 · SAE J514 37° Flare (also known as JIC) This is a very common connection in Hydraulic fluid power applications. Both the JIC male and JIC female fittings have 37° seat with straight threads.

Sep 11, 2024 · Common JIC fittings include 16, 20, 24, etc. teeth per inch, depending on the type of fitting and application. Checking the taper seating angle of the fitting helps in identifying whether it is a JIC fitting or not and its specific type. Common cone seating angles for JIC fittings include 37° and 74°, which are critical for forming a seal.

TORQUE VALUES: The minimum torque values listed are to provide a benchmark that give optimum results for leak free connections. Actual torque values should be based on individual application. JIC 37° are ttings seal with metal to metal contact between the ared nose of the tting and the ared tube face in the female connection.

Mar 23, 2022 · male JIC outer diameter (O.D.) SAE Straight Thread O-Ring (ORB) SAE J1926-1 and ISO 11296-1. Conforms to MS16142, UN/UNF Threads. This port connection (sometimes called O-Ring Boss) is recommended for optimum leakage control in medium and high pressure hydraulic systems. The male connector has a straight thread and an O-ring.

Crimp hose fittings connect Weatherhead hydraulic hoses to compatible JIC (Joint Industry Council) threaded equipment or hoses. They are used for general purpose industrial and hydraulic applications with low-, medium-, and high-pressure transfer of petroleum- …