For older floors with a small amount of moisture detected (less than about 3-lbs./1,000-sq.-ft. as identified by a calcium chloride test), a waterproofing agent like Siloxa-Tek 8510 should be ...

A new coating using NHC primer and UV-cured polymer protects iron from rust, cutting corrosion by 99.6% in saltwater tests.

A chloride blood test is used to diagnose a variety of health conditions. Here’s what the results mean and what happens after taking the test.

This article was originally published with the title “ Coating Iron with Zinc and other Metals ” in Scientific American Magazine Vol. 8 No. 39 (June 1853), p. 306 doi:10.1038 ...

EPA proposed a ban on methylene chloride in paint and coating removal products during the final days of the Obama administration in early 2017. The Obama-era proposal would have banned both methyl ...

The chloride levels in the blood should be 96 and 106 milliequivalents per liter (MEq/L). High levels indicate hyperchloremia, while low levels indicate hypochloremia. These conditions can have ...

The salt coating the roads before storms may keep your car from slipping, but that comes at a cost for your vehicle. ... Manesium Chloride, and Sodium Chloride are their technical names.

Normal chloride levels for adults are in the 96–106 mEq/L range. If your test shows a chloride level higher than 106 mEq/L, you have hyperchloremia. Normal ranges may sometimes differ by lab.

Laboratory analyses of a section of 8-in. pipe in heavy-fuel-oil service revealed failure from damaged coating and thermal insulation and from inefficient cathodic protection (CP). Laboratory ...